Operating Mechanism Of Air Insulated Switchgear

Before using the operating mechanism, a comprehensive inspection must be carried out. First, confirm whether the power supply or power source (such as hydraulic oil, air pressure) of the equipment is supplied normally to avoid operation failure due to insufficient power. Secondly, check whether the mechanical parts of the operating mechanism are flexible and whether there is any jamming or wear. If any abnormality is found, contact the technician in time for maintenance and do not force the operation.

In addition, the operator should be familiar with the control panel and operation buttons of the equipment to ensure that the function keys such as start, stop, and emergency brake can be correctly identified. Some high-end equipment may be equipped with a digital control system, and professional training is required before operation to avoid equipment damage or safety accidents caused by misoperation.

During the operation, the requirements of the equipment manual should be strictly followed. For example, hydraulic operating mechanisms usually need to adjust the pressure slowly to avoid instantaneous high-pressure shocks; pneumatic operating mechanisms need to pay attention to the stability of the air source to prevent air pressure fluctuations from affecting the accuracy of the movement. Electric operating mechanisms need to pay attention to the operating status of the motor to avoid overload operation.

Environmental factors should also be paid attention to during operation. For example, in a high temperature or humid environment, the heat dissipation and insulation performance of the equipment may be affected. The operator should adjust the operation rhythm appropriately to avoid overheating or short circuit of the equipment. At the same time, you should stay focused during the operation to avoid distraction and misoperation.

After the operation is completed, dust, oil and other debris on the surface and inside of the equipment should be cleaned in time to prevent accumulation from affecting the next use. Lubricate moving parts regularly and check whether fasteners are loose to ensure long-term stable operation of the equipment. For frequently used equipment, it is recommended to establish a maintenance log to record each operation and maintenance situation to facilitate tracking of equipment status.