How An Air Insulated Circuit Breaker Operates?

Aug 06, 2025

Leave a message

Air-insulated circuit breakers use air insulation to achieve breaking, similar to natural gases (such as nitrogen and dry air, but trace amounts of SF6 gas are prohibited) and synthetic gases (such as C4, C5 and their mixed gases, etc.). There are 7 steps to operate air insulated circuit breaker including closed operation, fault detection contact separation and isolation and etc.
 
  • Firstly, close it, which make current flow unimpeded through the main closed contacts within the breaker's insulated housing.
  •  Fault detection: sensors could detect abnormal current first.
  • When comes to trouble, the detection will trigger the circuit breaker operating mechanism, releasing stored energy ,usually from powerful springs.
  • Then, the mechanism rapidly drives the moving contacts away from the fixed contacts. As contacts separate while carrying current, an intense electrical arc forms across the gap.
  • Important and advanced procession- Arc Control and Quenching : This is where the specific design of the air insulated circuit breaker shines. The arc is forced into specially designed structures called "arc chutes" or "arc splitters."  These chutes are able to do as followed:
  • Stretch and Lengthen the Arc,which could increasing its resistance and cooling surface area.
  • Split the Arc: Using sets of metal plates, the main arc is divided into multiple smaller, series arcs.
  • Cool and De-ionize: The metal plates absorb heat energy from the arcs. The lengthened path and cooling cause the ionized gas (plasma) within the arc to recombine into neutral, non-conductive air molecules.
  • Increase Arc Voltage: Lengthening and splitting the arc significantly increases the voltage required to sustain it. Once this arc voltage exceeds the system voltage, the current drops to zero, and the arc is extinguished.

7. Isolation: With the arc extinguished, the circuit is safely interrupted. The contacts remain securely open until manually or electrically reset.

 

In conclusion, the air insulated circuit breaker come through these 7 steps to achieve opening and closing. During this process, there is no more SF6 , no more air pollution and  decrease the greenhouse effect.

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!